H3C SOHO IE4300, Command Reference Manual

Page: 2256 / 3296

9
Table 2 Command output
Field Description
IPsec Policy Template IPsec policy template name.
Sequence number Sequence number of the IPsec policy template entry.
Description Description of the IPsec policy template.
Traffic Flow Confidentiality Whether Traffic Flow Confidentiality (TFC) padding is enabled.
Security data flow ACL used by the IPsec policy template.
Selector mode
Data flow protection mode of the IPsec policy template: standard ,
aggregation , or per-host .
Local address Local end IP address of the IPsec tunnel.
IKE profile IKE profile used by the IPsec policy template.
IKEv2 profile IKEv2 profile used by the IPsec policy template.
Remote address Remote end IP address of the IPsec tunnel.
Transform set Transform set used by the IPsec policy template.
IPsec SA local duration(time based) Time-based IPsec SA lifetime, in seconds.
IPsec SA local duration(traffic
based)
Traffic-based IPsec SA lifetime, in kilobytes.
SA idle time Idle timeout of the IPsec SA, in seconds.
Related commands
ipsec { ipv6-policy | policy } isakmp template
display ipsec profile
Use
display ipsec profile
to display information about IPsec profiles.
Syntax
display ipsec profile [ profile-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
profile-name : Specifies an IPsec profile by its name, a case-insensitive string of 1 to 63
characters.
Usage guidelines
If you do not specify any parameters, this command displays information about all IPsec profiles.
Examples
# Display information about all IPsec profiles.
<Sysname> display ipsec profile
-----------------------------------------------