38
<Sysname> display qos lr interface
Interface: GigabitEthernet1/0/1
Direction: Outbound
CIR 2000 (kbps), CBS 20480 (Bytes)
Table 14 Command output
Field
Description
Interface
Interface name, including the interface type and interface number.
Direction
Direction in which the rate limit configuration is applied.
CIR
CIR in kbps.
CBS
CBS in bytes.
qos lr
Use
qos lr
to configure rate limiting on an interface.
Use
undo qos lr
to delete the rate limit configuration on an interface.
Syntax
qos lr
{
inbound
|
outbound
}
cir committed-information-rate
[
cbs
committed-burst-size
]
undo qos lr
{
inbound
|
outbound
}
Default
No rate limit is configured.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
inbound
: Limits the rate of incoming packets.
outbound
: Limits the rate of outgoing packets.
cir
committed-information-rate
: Specifies the CIR in kbps. The value range for
committed-information-rate
is 8 to 102400 for 100-Mbps interfaces, 8 to 1048576 for GE
interfaces, and 8 to 10485760 for 10-GE interfaces. The specified value must be a multiple of 8.
cbs committed-burst-size
: Specifies the CBS in bytes. The value range for
committed-burst-size
is 512 to 134217728, in increments of 512. The default value for this
argument is the product of 62.5 and the CIR and must be a multiple of 512. When the product is not
a multiple of 512, it is rounded up to the nearest integral multiple of 512 that is greater than the
product. A default value greater than 134217728 is converted to 134217728.
Examples
# Limit the rate of outgoing packets on GigabitEthernet 1/0/1, with CIR 256 kbps and CBS 51200
bytes.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos lr outbound cir 256 cbs 51200
Summary of Contents for SOHO IE4300
