10
handle at the chassis rear
To install the device in a 19-inch rack:
1.
Wear an ESD wrist strap and unpack the device and accessories.
2.
Make sure the rack is sturdy and reliably grounded.
3.
Use a mounting bracket to mark the cage nut installation positions on the rack posts. Four cage
nuts are required on each front rack post and two are required on each rear rack post.
4.
Install cages nuts at the marked installation positions.
5.
Use M6 screws to attach the slide rails to the rear rack posts.
Figure 4 Installing cage nuts and slide rails
6.
Use the provided M4 screws to attach the mounting brackets and chassis rails to both sides of
the device.
The device provides multiple installation positions for chassis rails. Attach chassis rails to the
appropriate positions and make sure the front ends of the slide rails can reach out of the chassis
rails after the device is installed in the rack.