Operation Manual – User Access
H3C SecPath Series Security Products
Chapter 2 PPPoE Server Configuration
2-5
# Configure virtual-template parameters on the firewall.
[H3C] interface virtual-template 1
[H3C-Virtual-Template1] ppp authentication-mode chap domain system
[H3C-Virtual-Template1] ppp chap user NE
[H3C-Virtual-Template1] remote address pool 1
[H3C-Virtual-Template1] ip address 1.1.1.1 255.0.0.0
# Configure the users in the domain to use the local authentication scheme.
[H3C] domain system
[H3C-isp-system] scheme local
# Add a local IP address pool containing nine IP addresses.
[H3C-isp-system] ip pool 1 1.1.1.2 1.1.1.10
When installed with PPPoE client software and configured with user name and
password, every host on the Ethernet can access the Internet through the firewall with
PPPoE.
If
radius-scheme
or
hwtacacs-scheme
is configured for authentication, the SecPath
firewall may also be configured with RADIUS/HWTACACS parameters, thus enabling
the system to charge. For detailed configuration procedures, please refer to the
Chapter “Security” in this manual.
