H3C SecPath Series, Command Reference Manual

Page: 13 / 27

6
<Sysname> display firewall http url-filter host item ^webfilter$
The HTTP request packet including "^webfilter$" had been matched for 10 times.
# Display URL address filtering information about all filtering entries.
<Sysname> display firewall http url-filter host all
SN Match-Times Keywords
----------------------------------------------
1 10 ^webfilter$
Table 3 Output description
Field Description
SN Serial number
Match-Times Number of times that the keyword has been matched
Keywords URL address filtering keyword
# Display detailed information about URL address filtering.
<Sysname> display firewall http url-filter host verbose
URL-filter host is enabled.
Default method: permit.
The support for IP address: deny.
No ACL group has been configured.
URL-filter host has loaded file “cfa0:/urlfilter”.
There are 10 packet(s) being filtered.
There are 0 packet(s) being passed.
Table 4 Output description
Field Description
Default method Default URL address filtering action, which can be permit or deny .
The support for IP address Support for website IP addresses, permit or deny .
display firewall http url-filter parameter
Syntax
display firewall http url-filter parameter [ all | item keywords | verbose ]
View
Any view
Default level
1: Monitor level
Parameters
all : Specifies all filtering keywords.
item keywords : Specifies a filtering keyword. The keywords argument is a case-insensitive string of 1 to
80 characters. Valid characters include numerals, English letters, wildcards (‘^’, ‘$’, ‘&’ and ‘*’), and
other ASCII characters with values in the range 31 to 127.
verbose : Specifies detailed information.