8
Installing the PFC
The procedures for installing the mounting brackets to the font part and
middle part of the PFC are similar. Follow these steps to install the
mounting brackets to the front part of the PFC.
1.
Wear the ESD wrist strap, check the grounding and stability of the
chassis, and prepare the screws provided with the mounting brackets.
2.
Use the screws to fix the left and right mounting brackets to the two
sides of the front panel, as shown in
Figure 5 Install the mounting brackets to the chassis
3.
Place the PFC to a proper place of the rack and use the screws and
nuts to fix the mounting brackets to the square holes of the rack. Make
sure that the PFC is fixed horizontally and firmly.
