2-27
Figure2-32 Removing a power supply
(1) Use the thumb to press the latch towards the handle
(2) Pull the power supply out
Connecting power cords
WARNING!
•
Make sure each power cord has a separate circuit breaker.
•
Before you connect a power cord, make sure the circuit breaker for the power cord is switched
off.
The switch uses PSR1600C-12A-B power supplies. To connect the AC power cord for a
PSR1600C-12A-B power supply:
1.
Insert the female connector of the AC power cord supplied with the power supply into the power
receptacle on the power supply.
2.
Use a releasable cable tie to secure the power cord to the handle of the power supply, as shown
in
3.
Connect the other end of the power cord to an AC power source.
Figure2-33 Connecting the AC power cord for a PSR1600C-12A-B power supply
(1) Releasable cable tie
