2-13
3.
As shown in
, use one hand to hold the power supply handle, press the latch towards
the handle, and then pull the power supply part way out of the slot. Supporting the power supply
with the other hand, pull it completely out of the slot.
4.
Put the removed power supply in an antistatic bag for future use.
5.
If you are not to install a new power supply, install a filler panel in the slot to ensure good
ventilation in the switch.
Figure2-21 Removing the power supply
(1) Press the latch towards the handle
(2) Pull the power supply out
Connecting the power cord for a power supply
WARNING!
•
Make sure each power cord has a separate circuit breaker.
•
Before you connect a power cord, make sure the circuit breaker for the power cord is switched
off.
The switch uses PSR1600B-12A-B power supplies. To connect the AC power cord for a
PSR1600B-12A-B power supply:
1.
Insert the female connector of the AC power cord supplied with the power supply into the power
receptacle on the power supply.
2.
Use a releasable cable tie to secure the power cord to the handle of the power supply, as shown
in
3.
Connect the other end of the power cord to an AC power source.
1
2