7
Mounting
bracket
installation
position
Chassis dimensions
Distance
between the
front and rear
rack posts
Rack requirements
Mounting
brackets installed
near the power
module side
•
Width
—440 mm (17.32 in)
•
Height
—88.1 mm (3.47 in)/2
RU
•
Depth
—630 mm (24.80 in)
540 mm (21.26 in) for the
chassis
92 mm (3.62 in) for the
mounting brackets
506 to 778 mm
(19.92 to 30.63 in)
IMPORTANT:
To reserve enough cabling space and close the rack door easily, make sure the rack meets the
depth requirements.
Rack-mounting procedure at a glance
Figure 6 Rack-mounting procedure
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate
location, and attach the switch to the rack using the mounting brackets.
Mount the switch in the rack
Select an installation position for the
mounting brackets (near the power
module side or port side )
Connect the grounding cable
Attach slide rails to the rack
Attach the mounting brackets to the
switch
Attach chassis rails to the switch
