H3C S6861 Series, Installation Manual, Page: 46 / 62

39
An S6861-54QT switch comes with power module slot PWR1 empty and power module slot PWR2
installed with a filler panel. In
Figure 52 , two PSR450-12A1 power modules are installed in the power
module slots. For more information about installing and removing a power module, see " Installing
and removing a power module ."
An S6861-54QT switch comes with the five fan tray slots empty. You must install five fan trays of the
same model for the switch. In
Figure 52 , five LSPM1FANSB fan trays are installed in the fan tray
slots. For more information about installing and removing a fan tray, see " Installing and removing a
fan tray ."
Figure 53 Left side panel
(1) Primary grounding point (2) Auxiliary grounding point
S6861-30QF
Figure 54 Front panel
(1) SFP+ port LED (2) SFP+ port
(3) QSFP+ port LED (4) QSFP+ port