2-21
3.
Use the grounding screws to attach the grounding lug of the grounding cable to the grounding
holes at the grounding point (recommended torque: 20 kgf-cm). Use a screwdriver to tighten
the screws. See
Figure2-34 Attaching a grounding cable that has a single-hole lug to the grounding point
(S6850-56HF)
Figure2-35 Attaching a grounding cable that has a dule-hole lug to the grounding point
(S6850-56HF)
Figure2-36 Attaching a grounding cable to auxiliary grounding point 2 on the S9850-4C
switch
Attaching the slide rails to the rack
The procedure is the same for attaching 1U and 2U slide rails to the rack. This section uses the 1U
slide rails as an example.