H3C S6850 Series, Configuration Manual

Page: 212 / 394

8
Figure 2 Network diagram
Procedure
1. Configure Device A:
# Enter MST region view.
<DeviceA> system-view
[DeviceA] stp region-configuration
# Configure the MST region name, VLAN-to-instance mappings, and revision level.
[DeviceA-mst-region] region-name example
[DeviceA-mst-region] instance 1 vlan 10
[DeviceA-mst-region] instance 2 vlan 20
[DeviceA-mst-region] revision-level 0
# Manually activate the MST region configuration.
[DeviceA-mst-region] active region-configuration
[DeviceA-mst-region] quit
# Configure Device A as the primary root bridge of MSTI 1.
[DeviceA] stp instance 1 root primary
# Globally enable the spanning tree feature.
[DeviceA] stp global enable
# Globally enable MVRP.
[DeviceA] mvrp global enable
VLAN 20
Permit: all VLANs
Per
mit:
VL
AN
40
Pe
rm
it:
al
l V
LA
Ns
Permit: VLANs 20, 40 Permit: all VLANs
Device A Device B
Device C Device D
W
GE
1/0
/2
W
G
E
1
/0
/1
W
GE
1/0
/2
W
G
E
1
/0
/1
W
G
E
1
/0
/1
W
G
E
1
/0
/1
WGE1/0/3 WGE1/0/3
W
GE
1/0
/2
W
GE
1/0
/2
VLAN 10 MSTI 1
VLAN 20 MSTI 2
Other VLANs MSTI 0
VLAN 10
MSTI 2
A
D
Link blocked by
spanning tree Link not blocked by
spanning tree
Blocked port Designated port Root port
Root bridge
MSTI 1
B
MSTI 0
A
C
B
D
A
C
B
C
Topology of each MSTI