H3C S6850 Series Manual Download Page 53

Page: 53 / 54

5-52

LED status

Description

cord connection or power source shutdown.

Fan tray alarm LEDs

Each fan tray provides an alarm LED.

Table5-14

shows the description for the alarm LEDs on the

FAN-40B-1-C or FAN-40F-1-D fan tray. For the description of the alarm LEDs on other fan trays, see

Table5-13

Table5-13 Description for the alarm LEDs on the fan trays (1)

Status

Description

The fan tray is faulty.

Off

The fan tray is operating correctly or no power is being input.

Table5-14 Description for the alarm LEDs on the fan trays (2)

Status

Description

Steady green

The fan tray is operating correctly.

Steady red

The fan tray is faulty.

Off

The fan tray is not installed securely or no power is present.

Power module status LED

The LS-6850-56HF-H3 switch provides a power module status LED (PSU) to indicate the power
module status.

Table5-15 Description for the power module status LED

LED mark

Status

Description

PSU

Steady green

Both power modules are operating correctly.

Steady yellow

A power module is faulty or not present.

Off

Both power modules are faulty or not present.

Fan tray status LED

The LS-6850-56HF-H3 switch provides a fan tray status LED (FAN) to indicate the fan tray status.

Table5-16 Description for the fan tray status LED

LED mark

Status

Description

FAN

Steady green

All fan trays are operating correctly.

Steady yellow

A fan tray is faulty or not present.

Steady red

A minimum or two fan trays are faulty or not
present.

Summary of Contents for S6850 Series























































Search results

Summary of Contents for S6850 Series

Reviews:

Related manuals for S6850 Series

Brands by name

Popular brands

H3C S6850 Series, Manual

Search results

Summary of Contents for S6850 Series

Reviews:

Related manuals for S6850 Series

Brands by name

Popular brands