H3C S6850-56HF-IM, Manual, Page: 9 / 36

2-7
Figure2-11 Removing a mounting bracket from a tank-mount adapter
2. Repeat the procedure to remove the other mounting bracket.
3. Directly attach the mounting brackets to the chassis.
Figure2-12 Attaching the mounting brackets to the chassis
Mounting the switch in the tank
The switch comes with mounting brackets, slide rails, and tank-mount adapters installed.
To mount the switch in a tank with a width of 23 inches, make sure you have removed the slide rails.
For more information, see "
Removing slide rails ."
To mount the switch in a tank with a width of 21 inches, make sure you have removed the tank-mount
adapters, and removed mounting brackets and attached them to the chassis. For more information,
see "
Removing tank-mount adapters " and " Removing mounting brackets and attaching them to the
chassis ."
The installation slot for the switch in this document is for your reference only.