manualshive.com logo in svg

H3C S6820 Series, Installation Manual, Page: 50 / 70

Share
Download
H3C S6820 Series Installation Manual Download Page 50

43 

Figure 59 Rear panel 

 

(1) Mini USB console port 

(2) Copper management Ethernet port 

(3) Serial console port 

(4) USB port 

(5) SFP port 

(6) SFP port LED 

(7) Fan tray 1 

(8) Fan tray 2 

(9) Fan tray 3 

(10) Fan tray 4 

(11) Fan tray 5 

(12) Power module 1 

(13) Power module 2 

(14) Fiber management Ethernet port 

(15) Fiber management Ethernet port LED (LINK/ACT) 
(16) Copper Management Ethernet port LED (ACT) 

(17) System status LED (SYS) 

(18) Copper management Ethernet port LED (LINK)

 

 

The S6820-56HF switch comes with power module slot PWR1 empty and power module slot PWR2 
installed with a filler panel. You can install one or two power modules for the switch as needed. 
In 

Figure 59

, two LSVM1AC650 power modules are installed in the power module slots. 

The S6820-56HF switch comes with the five fan tray slots empty. You must install five fan trays of the 
same model for the switch. In 

Figure 59

, five LSWM1FANSA fan trays are installed in the fan tray 

slots.  

The S6820-56HF switch comes with a dust plug in the fiber management Ethernet port on the rear 
panel. To use the fiber management Ethernet port, first remove the dust plug. In 

Figure 59

, the dust 

plug has been removed from the fiber management Ethernet port. 

Figure 60 Left panel 

 

(1) Primary grounding point 

(2) Auxiliary grounding point 

 

Summary of Contents for S6820 Series







































































Reviews:

No comments