32
Figure2-44 Removing the power cord from an LSVM1DC300/LSVM1DC650 power module
(1) Press the tabs on the power cord connector with your thumb and forefinger
(2) Pull the power cord connector out
Figure2-45 Removing the power cord from a PSR450-12D power module
(1) Use a flat-head screwdriver to loosen the screws on the power cord connector
(2) Pull the power cord connector out
Removing a PSR450-12AHD power module
The PSR450-12AHD power module removal procedure is the same for the S6800-54QF
(LS-6800-54QF-H3), S6800-54QF (LS-6800-54QF-H5) and S6800-54QT (LS-6800-54QT-H3)
switches.
To remove a PSR450-12AHD power module:
1.
Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.
2.
Open the cable clamp (see
), and then remove the power cord connector from the
power module (see
1
2
