14
Figure 5
Edge Switch List page
b.
Add an FTP network:
Select
Network
from the navigation tree, click
Add
on the page that appears, enter
For FTP
for
Name
,
100
for
VLAN ID
, and
10
for
Max. Connections
, and click
OK
.
The network name
For FTP
is displayed in the
Network List
page, as shown in
.
Figure 6
Network List page
c.
Define the VSI type of VM 1:
i
Select
VSI Type
from the navigation tree. The
VSI Type List
page appears.
ii
Click
Add
.
iii
On the page that appears, do the following:
−
Enter
VM1 VSI
for
Name
.
−
Select
For FTP
from the
Network
list, and select the
Bandwidth Control
and
VM Access
Control
options.
−
Enter
172.16.1.0
for
Client IP
and
0.0.0.255
for
Wildcard Mask
.
−
Select
BOTH
from the
Filtering Direction
list.
−
Enter
2048
for
CIR (kbps)
and
4096
for
PIR (kbps)
.
iv
Click
Save and Release
.
The VSI type
VM1 VSI
is displayed in the
VSI Type List
.
