8
Step Command
Remarks
2.
Enter OpenFlow instance view.
openflow instance
instance-id
N/A
3.
Set the controller mode.
controller mode
{
multiple
|
single
}
By default, the controller mode is
multiple
.
Setting the maximum number of flow entries for an extensibility
flow table
You can set the maximum number of flow entries that an extensibility flow table supports. When the
maximum number is reached, the OpenFlow instance does not accept new flow entries for that table and
sends a deployment failure notification to the controller.
To set the maximum number of flow entries for an extensibility flow table:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter OpenFlow instance
view.
openflow instance
instance-id
N/A
3.
Set the maximum number of
extensibility flow entries.
flow-entry max-limit
limit-value
By default, an OpenFlow
extensibility flow table supports a
maximum of 65535 flow entries.
Configuring inband management VLANs
Inband management VLANs of an OpenFlow instance are part of the VLANs associated with the
OpenFlow instance. Inband management VLANs are used to establish connections between the
OpenFlow instance and controllers in an OpenFlow instance.
When the inband management VLANs are configured, the data packets within the inband management
VLANs are not forwarded through OpenFlow. The ports that are assigned to only in-band management
VLANs are not OpenFlow ports. Before configuring inband management VLANs, you must plan the
network.
To configure inband management VLANs:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter OpenFlow
instance view.
openflow instance
instance-id
N/A
3.
Configure inband
management VLANs.
in-band management vlan
vlan-list
By default, no inband management
VLAN is configured.
The inband management VLANs of an
OpenFlow instance must be within the list
of the VLANs that are associated with the
OpenFlow instance.
