H3C S5830V2 series, Installation Manual, Page: 26 / 63

19
Connecting the LSVM1AC650 or LSVM1AC300 power
module
1.
Insert the female connector of the AC power cord supplied with the power module into the
power receptacle on the power module.
2.
Use a cable tie to secure the power cord to the handle of the power module, as shown in Figure
23 .
3.
Connect the other end of the power cord to an AC power outlet.
Figure 23 Connecting the LSVM1AC650 or LSVM1AC300 power module
(1) Cable tie
(2) Tighten the cable tie to secure the power cord to the handle of the power module
Connecting the LSVM1DC650 or LSVM1DC300 power
module
1.
Unpack the DC power cord, identify the plug for connecting to the power module, orient the plug
with the power receptacle on the power module, and insert the plug into the receptacle
(see
Figure 24 ).
The receptacle is foolproof. If you cannot insert the plug into the receptacle, re-orient the plug
rather than use excessive force to push it in.
2.
Use a cable tie to secure the power cord to the handle of the power module, as shown in Figure
23 .
3.
Connect the other end of the power cord to the DC power source.
Figure 24 Connecting the LSVM1DC650 or LSVM1DC300 power module