8
Views
Any view
Predefined user roles
network-admin
Parameters
domain-id
: Specifies a domain ID for the IRF fabric. The value range is 0 to 4294967295.
Usage guidelines
One IRF fabric forms one IRF domain. IRF uses IRF domain IDs to uniquely identify IRF fabrics and prevent
IRF fabrics from interfering with one another.
If you use a member device in one IRF fabric as the intermediate device for performing LACP MAD, ARP
MAD, or ND MAD for another IRF fabric, you must assign the two IRF fabrics different domain IDs to
avoid false detection of IRF split.
Examples
# Set the IRF domain ID to 10.
<Sysname> system-view
[Sysname] irf domain 10
irf link-delay
Use
irf link-delay
to set a delay for the IRF ports to report a link down event.
Use
undo irf link-delay
to restore the default.
Syntax
irf link-delay
interval
undo irf link-delay
Default
The IRF link down event report delay is 4 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
interval
: Sets the IRF link down report delay, in the range of 0 to 30000 milliseconds.
Usage guidelines
An IRF link down report delay helps avoid link flapping causing frequent IRF splits and merges during a
short time.
An IRF port handles link down and link up events, as follows:
•
When the IRF link changes from up to down, the port does not immediately report the change to the
IRF fabric. If the IRF link state is still down when the delay time is reached, the port reports the
change to the IRF fabric.