42
Step Command
Remarks
6.
Specify the authentication
method for obtaining a
temporary user role.
authentication super
{
hwtacacs-scheme
hwtacacs-scheme-name
|
radius-scheme
radius-scheme-name
} *
By default, the default
authentication method is
used for obtaining a
temporary user role.
Configuring authorization methods for an ISP domain
Configuration prerequisites
Before configuring authorization methods, complete the following tasks:
1.
Determine the access type or service type to be configured. With AAA, you can configure an
authorization scheme for each access type and service type.
2.
Determine whether to configure the default authorization method for all access types or service
types. The default authorization method applies to all access users, but it has a lower priority than
the authorization method that is specified for an access type or service type.
Configuration guidelines
When configuring authorization methods, follow these guidelines:
•
The device does not support LDAP authorization.
•
To configure RADIUS authorization, also configure RADIUS authentication, and reference the same
RADIUS scheme for RADIUS authentication and authorization. If the RADIUS authorization
configuration is invalid or RADIUS authorization fails, the RADIUS authentication also fails.
Configuration procedure
To configure authorization methods for an ISP domain:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter ISP domain view.
domain
isp-
name
N/A
3.
Specify the default
authorization method for
all types of users.
authorization default
{
hwtacacs-scheme
hwtacacs-scheme-name
[
radius-scheme
radius-scheme-name
] [
local
] [
none
] |
local
[
none
] |
none
|
radius-scheme
radius-scheme-name
[
hwtacacs-scheme
hwtacacs-scheme-name
] [
local
] [
none
] }
By default, the authorization
method is
local
.
The
none
keyword is not
supported in FIPS mode.
4.
Specify the command
authorization method.
authorization command
{
hwtacacs-scheme
hwtacacs-scheme-name
[
local
[
none
] |
local
[
none
] |
none
}
By default, the default
authorization method is used
for command authorization.
The
none
keyword is not
supported in FIPS mode.
5.
Specify the authorization
method for LAN users.
authorization lan-access
{
local
[
none
] |
none
|
radius-scheme
radius-scheme-name
[
local
] [
none
] }
By default, the default
authorization method is used
for LAN users.
The
none
keyword is not
supported in FIPS mode.