44
Operator: AND
Rule(s) : If-match ACL 3000
Behavior: count
Accounting Enable:
251 (Packets)
The output shows that a total of 251 packets match ACL 3000.
{
On GigabitEthernet 2/0/1 on Device C:
[H3C-GigabitEthernet2/0/1] display qos policy interface gigabitethernet 2/0/1
Interface: GigabitEthernet2/0/1
Direction: Inbound
Direction: Inbound
Policy: count
Classifier: count
Operator: AND
Rule(s) : If-match ACL 3000
Behavior: count
Accounting Enable:
50 (Packets)
The output shows that a total of 50 packets match ACL 3000.
4.
Compare the traffic statistics on the two interfaces. Packet loss or forwarding fault exists between
Device B and Device C.
Related commands
This section lists the commands that you might use for troubleshooting QoS and ACLs.
Command
Description
display acl
Displays configuration and match statistics for ACLs.
display acl resource
Displays ACL resource usage.
display diagnostic-information
Displays or saves running status data for ACLs.
display qos policy interface
Displays information about the QoS policies applied
to specified interfaces.
display qos policy user-defined
Displays user-defined QoS policy configuration.
display traffic classifier user-defined
Displays user-defined classes.