H3C S5820V2H Configuration Manual Download Page 4

Conventions 

This section describes the conventions used in this documentation set. 

Command conventions 

Convention Description 

Boldface Bold

 text represents commands and keywords that you enter literally as shown. 

Italic

 

Italic

 text represents arguments that you replace with actual values. 

[ ] 

Square brackets enclose syntax choices (keywords or arguments) that are optional. 

{ x | y | ... }

 

Braces enclose a set of required syntax choices separated by vertical bars, from which 
you select one.  

[ x | y | ... ]

 

Square brackets enclose a set of optional syntax choices separated by vertical bars, from 
which you select one or none.  

{ x | y | ... } *

 

Asterisk marked braces enclose a set of required syntax choices separated by vertical 
bars, from which you select at least one. 

[ x | y | ... ] *

 

Asterisk marked square brackets enclose optional syntax choices separated by vertical 
bars, from which you select one choice, multiple choices, or none.  

&<1-n> 

The argument or keyword and argument combination before the ampersand (&) sign can 
be entered 1 to n times. 

A line that starts with a pound (#) sign is comments. 

 

GUI conventions 

Convention Description 

Boldface

 

Window names, button names, field names, and menu items are in bold text. For 
example, the 

New User 

window appears; click 

OK

Multi-level menus are separated by angle brackets. For example, 

File 

>

 Create 

>

 Folder

 

Symbols 

Convention Description 

 WARNING 

An alert that calls attention to important information that if not understood or followed can 
result in personal injury. 

 CAUTION 

An alert that calls attention to important information that if not understood or followed can 
result in data loss, data corruption, or damage to hardware or software.  

 

IMPORTANT 

An alert that calls attention to essential information. 

NOTE 

An alert that contains additional or supplementary information. 

 TIP 

An alert that provides helpful information. 

 

Network topology icons 

 

Represents a generic network device, such as a router, switch, or firewall. 

Summary of Contents for S5820V2H






















































Reviews: