1-17
Follow these steps to configure global IRF port load sharing mode:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Configure global IRF port
load sharing mode
irf-port load-sharing mode
{
destination-ip
|
destination-mac
|
source-ip
|
source-mac
} *
Required
By default,
z
The S5800-56C and
S5800-56C-PWR switches use the
inbound port number as the hash
key.
z
Other models of the S5820X series
and S5800 series switches use the
combination of the source and
destination MAC addresses as the
hash key when processing Layer 2
packets, and use the combination
of the source and destination IP
addresses when processing Layer
3 packets.
This configuration is effective to all IRF
ports.
At present, when configuring IRF port load sharing mode in system view, you can specify:
z
Any of the source IP address, destination IP address, source MAC address or destination MAC
address separately as the hash key.
z
The combination of the source and the destination IP addresses as the hash key.
z
The combination of the source and the destination MAC addresses as the hash key.
z
Configuring load sharing mode for an IRF port
Follow these steps to configure load sharing mode for an IRF port:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter IRF port view
irf-port member-id
/
port-number
—
