H3C s5800 series, Installation Manual, Page: 67 / 101

59
Figure 61 Connect the S5800-56C/S5800-32C switch to a 12 VDC output RPS (I)
Figure 62 Connect the S5800-56C/S5800-32C switch to a 12 VDC output RPS (II)
Connecting the PSR150-A/PSR150-A1
1. Pull the bail latch leftwards (see Figure 63 ).
2. Connect one end of the AC power cord supplied with the power module to the power receptacle
on the power module (see callout 1 in Figure 64 ).
3. Pull the bail latch rightwards to secure the plug to the power receptacle (see callout 2 in Figure 64 ).
4. Connect the other end of the power cord to an AC power outlet.
Figure 63 Connect an AC power cord to the PSR150-A/PSR150-A1 (I)