H3C S5590-HI Series, Manual

Page: 12 / 40

S5590-EI switch series
S5590-28T8XC-EI
Figure2-9 Front panel
(1) 10/100/1000BASE-T autosensing Ethernet port
(2) 10/100/1000BASE-T autosensing Ethernet port
LED
(3) SFP port (4) SFP+ port
(5) Management Ethernet port (MGMT) (6) Console port (CONSOLE)
(7) Mode button (8) USB port
(9) System status LED (SYS) (10) Mode LED (MODE)
(11) Expansion card status LED (SLOT) (12) Power supply 2 status LED (PWR2)
(13) Power supply 1 status LED (PWR1) (14) Management Ethernet port LED (ACT/LINK)
(15) SFP+ port LED (16) SFP port LED
Figure2-10 Rear panel
(1) Grounding screw (2) Expansion card
(3) Fan tray 1 (4) Fan tray 2
(5) Power supply 1 (6) Power supply 2
The S5590-28T8XC-EI switch came with power supply slot 1 empty and power supply slot 2 installed
with a filler panel. You can install one or two power supplies for the switch as required. In
Figure2-10 ,
two PSR180-12A-B AC power supplies are installed in the power supply slots.
The S5590-28T8XC-EI switch came with two fan tray slots empty. You must install two fan trays of
the same model for the switch. In
Figure2-10 , two LSPM1FANSB-SN fan trays are installed in the fan
tray slots.
The S5590-28T8XC-EI switch came with one expansion slot installed with a filler panel. You can
select an expansion card for the switch as required. In
Figure2-10 , an LSWM2QP2P interface card is
installed in the expansion slot.