31
Connecting an AC power cord to the switch
To connect an AC power cord to a switch that uses fixed power modules:
1.
Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.
2.
Attach the hooks of the bail latch into the holes on the two sides of the AC-input power receptacle,
and pull the bail latch upwards (see
).
3.
Connect one end of the AC power cord to the AC-input power receptacle on the switch (see callout
1 in
).
4.
Pull the bail latch down to secure the plug to the power receptacle (see callout 2 in
5.
Connect the other end of the power cord to the AC power outlet.
Figure 40
Connecting an AC power cord to the switch (1)
Figure 41
Connecting an AC power cord to the switch (2)
