Command Manual – AAA&RADIUS&HWTACACS
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-58
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] timer quiet 10
1.2.28 timer realtime-accounting
Syntax
timer realtime-accounting
minutes
undo timer realtime-accounting
View
RADIUS scheme view
Parameter
minutes
: Real-time accounting interval. It ranges from 3 minutes to 60 minutes and
must be a multiple of 3. By default, this interval is 12 minutes.
Description
Use the
timer realtime-accounting
command to set the real-time accounting interval.
Use the
undo timer realtime-accounting
command to restore the default real-time
accounting interval.
Note that:
z
To charge the users in real time, you should set the interval of real-time accounting.
After the setting, the switch sends the accounting information of online users to the
RADIUS server at regular intervals.
z
The setting of the real-time accounting interval depends to some degree on the
performance of the switch and the RADIUS server. The higher the performance of
the switch and the RADIUS server is, the shorter the interval can be. You are
recommended to set the interval as long as possible when the number of users is
relatively great (
ú
1000). Table 1-5 lists the numbers of users and the
corresponding recommended intervals.
Table 1-5
Numbers of users and corresponding recommended intervals
Number of users
Real-time accounting interval
1 to 99
3
100 to 499
6
500 to 999
12
