H3C S5500-SI Series, Operation Manual

Page: 471 / 1217

1-5
To do... Use the command... Remarks
Enter system view system-view —
interface interface-type
interface-number
Enter port view or port group
view
port-group manual
port-group-name
Required
Use either approach.
Configue the user port link type
as hybrid
port link-type hybrid
Required
Access by default
Specify the user VLAN that
comprises the current user
port(s) as the default VLAN
port hybrid pvid vlan vlan-id
Required
VLAN 1 by default
Configure the current user
ports to permit packets of the
specified IPv6 multicast VLAN
to pass and untag the packets
port hybrid vlan vlan-id-list
{ tagged | untagged }
Required
By default, a hybrid port permits
only packets of VLAN 1 to pass.
For details about the port link-type , port hybrid pvid vlan , and port hybrid vlan commands, refer to
VLAN Commands in the Access Volume.
Configuring IPv6 Multicast VLAN Ports
In this approach, you need to configure a VLAN as an IPv6 multicast VLAN and then assign user ports
to this IPv6 multicast VLAN by either adding the user ports in the IPv6 multicast VLAN or specifying the
IPv6 multicast VLAN on the user ports. These two methods give the same result.
Configure IPv6 multicast VLAN ports in IPv6 multicast VLAN view
Follow these steps to configure IPv6 multicast VLAN ports in IPv6 multicast VLAN view:
To do... Use the command... Remarks
Enter system view system-view —
Configure the specified VLAN
as an IPv6 multicast VLAN and
enter IPv6 multicast VLAN view
multicast-vlan ipv6 vlan-id
Required
No IPv6 multicast VLAN
configured by default
Assign port(s) to the IPv6
multicast VLAN
port interface-list
Required
By default, an IPv6 multicast
VLAN has no ports.