H3C S5500-SI Series, Operation Manual

Page: 428 / 1217

1-3
z
For information about IGMP Snooping, router ports, and member ports, refer to IGMP Snooping
Configuration in the IP Multicast Volume .
z
For information about VLAN tags, refer to VLAN Configuration in the Access Volume .
Multicast VLAN Configuration Task List
Complete the following tasks to configure multicast VLAN:
Task Remarks
Configuring Sub-VLAN-Based Multicast VLAN
Configuring User Port Attributes
Configuring Port-Based
Multicast VLAN
Configuring Multicast VLAN Ports
Required
Use either approach.
If you have configured both sub-VLAN-based multicast VLAN and port-based multicast VLAN on a
device, the port-based multicast VLAN configuration is given preference.
Configuring Sub-VLAN-Based Multicast VLAN
Configuration Prerequisites
Before configuring sub-VLAN-based multicast VLAN, complete the following tasks:
z
Create VLANs as required
z
Enable IGMP Snooping in the VLAN to be configured as a multicast VLAN
Configuring Sub-VLAN-Based Multicast VLAN
In this approach, you need to configure a VLAN as a multicast VLAN, and then configure user VLANs as
sub-VLANs of the multicast VLAN.
Follow these steps to configure sub-VLAN-based multicast VLAN:
To do… Use the command… Remarks
Enter system view
system-view
—
Configure the specified VLAN
as a multicast VLAN and enter
multicast VLAN view
multicast-vlan vlan-id
Required
Not a multicast VLAN by default
Configure the specified
VLAN(s) as sub-VLAN(s) of the
multicast VLAN
subvlan vlan-list
Required
By default, a multicast VLAN
has no sub-VLANs.