Method 2 +12 VDC (RPS)
1
2
3
You can use only the RPS power supply recommended by H3C (optional RPS power
supply and power cable) for RPS DC input.
Install an OT terminal on the other end of the grounding
cable, and connect the OT terminal to the grounding strip.
Connect the OT terminal of the
grounding cable to the switch
1
2
Connecting the power cable
Before connecting the power cable, connect the grounding cable and make sure that
the switch is correctly grounded.
Connect the power cable to the switch first and then to the power supply system to
avoid bodily injury.
Connect the AC power cable
Install the bail latch
1
2
3
Connect the power
cable to the receptacle
Secure the bail latch over
the power cable
Connect the DC power cable
Method 1 –52 VDC to –55 VDC (RPS)
2
1
3
Copyright © 2011, Hangzhou H3C Technologies Co., Ltd.
For more information about the product and installation procedures, log in to
www.h3c.com
