120
deactive
,
patch delete
,
patch install
, and
undo patch install
. For example, if you execute the
patch active
command for the patches in DEACTIVE state, the patches switch to the ACTIVE state.
Figure 42
Relationship between patch state changes and command actions
NOTE:
Information about patch states is saved in file
patchstate
on the Flash. H3C recommends that you do not
operate this file.
IDLE state
Patches in IDLE state are not loaded. You cannot install or run the patches, as shown in
(In this
example, the memory patch area can load up to eight patches).
Figure 43
Patches are not loaded to the memory patch area
