58
NOTE:
•
The S5500-28SC-HI switch comes with an expansion interface card slot covered by a filler panel.
•
The S5500-28SC-HI switch comes with power module slots empty. You can install one or two power
modules for the switch as needed. In
Figure 73
, a PSR150-A power module is installed in power module
slot 1.
•
The S5500-28SC-HI switch also comes with the fan tray slot empty. You must install a fan tray for the
switch and make sure the ventilation direction of the fan tray is suitable at the installation site. In
Figure
73
, an LSPM1FAN fan tray is installed.
Figure 74
S5500-28SC-HI left side panel
(1) Side grounding point
S5500-52SC-HI
Figure 75
S5500-52SC-HI front panel
(1) 10/100/1000Base-T auto-sensing Ethernet port
(2) 10/100/1000Base-T Ethernet port LED
(3) ACT LED for the management Ethernet port
(4) Management Ethernet port
(5) LINK LED for the management Ethernet port
(6) Console port
(7) Seven-segment LED (Unit)
(8) Port LED mode switching button
(9) System status LED (SYS)
(10) SFP+ port
(11) Port mode LED (MODE)
(12) Interface card status LED (SLOT)
(13) SFP+ port LED
(14) Power module
2 status LED (PWR2)
(15) 1000Base-X SFP port LED
(16) Power module 1 status LED (PWR1)