5
Installing the switch in a 19-inch rack
Installation accessories
Table 3 Installation accessories for the S5150-EI switches
Chassis
Installation
methods
Installation requirements
Installation
procedure
S5150X-16ST-
EI
Using front
mounting brackets
Install the front mounting brackets at
the port side or power module side.
S5150X-16S-EI
Using front
mounting brackets
Install the front mounting brackets at
the port side, power module side, or
the middle-mounting position.
S5150-24S-PW
R-EI
Using front
mounting brackets
Install the front mounting brackets at
the middle-mounting position.
Using front and rear
mounting brackets
•
Install the front mounting
brackets at the port side or power
module side.
•
Install the rear mounting brackets
according to the rack depth.
{
If the rack depth is in the
range of 429 to 595 mm
(16.89 to 23.43 in), orient the
bracket with the wide flange
inside the rack.
{
If the rack depth is in the
range of 274 to 440 mm
(10.79 to 17.32 in) and the
distance from the rear rack
posts to the inner surface of
the cabinet door is longer
than 153 mm (6.02 in), orient
the bracket with the wide
flange outside the rack.
using front and rear
mounting brackets
(S5150-24S-PWR-EI)
."
Figure 2 Procedure for rack-mounting by using front mounting brackets
Figure 3 Procedure for rack-mounting by using front and rear mounting brackets
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate
location, and attach the switch to the rack by using the mounting brackets.
Summary of Contents for S5150-EI Series
Page 73: ...65 mounting switch 13...
