9
Configuring RIP between an MCE and a PE
1.
Enter system view.
system-view
2.
Create a RIP process for a VPN instance and enter RIP view.
rip
[
process-id
]
vpn-instance
vpn-instance-name
3.
Enable RIP on the interface attached to the specified network.
network network-address
[
wildcard-mask
]
By default, RIP is disabled on an interface.
4.
Redistribute the VPN routes.
import-route protocol
[
as-number
] [
process-id
|
all-processes
]
[
allow-direct
|
cost
cost-value
|
route-policy route-policy-name
|
tag
tag
]
*
By default, no routes are redistributed into RIP.
Configuring OSPF between an MCE and a PE
1.
Enter system view.
system-view
2.
Create an OSPF process for a VPN instance and enter OSPF view.
ospf
[
process-id
|
router-id router-id
|
vpn-instance
vpn-instance-name
]
*
3.
Disable routing loop detection.
vpn-instance-capability simple
By default, routing loop detection is enabled and the MCE does not receive OSPF routes from
the PE.
4.
Redistribute the VPN routes.
import-route
protocol
[
as-number
] [
process-id
|
all-processes
]
[
allow-direct
|
cost
cost-value
|
nssa-only
|
route-policy
route-policy-name
|
tag tag
|
type
type
]
*
By default, no routes are redistributed into OSPF.
5.
Create an OSPF area and enter OSPF area view.
area
area-id
6.
Enable OSPF on the interface attached to the specified network in the area.
network
ip-address wildcard-mask
By default, an interface neither belongs to an area nor runs OSPF.
Display and maintenance commands for MCE
Execute
display
commands in any view.
Task
Command
Display VPN instance information.
display ip vpn-instance
[
instance-name
vpn-instance-name
]
