5
Switch model
Mounting brackets
Views
•
S5130-28S-PWR-EI
•
S5130-28S-HPWR-EI
•
S5130-28TP-PWR-EI
•
S5130-52S-EI
•
S5130-52S-PWR-EI
•
S5130-52TP-EI
•
S5130-52TP-PWR-EI
•
S5130-28F-EI
One pair of 1U four-hole
mounting brackets
Figure 2 1U two-hole mounting bracket
(1) Screw hole for attaching the bracket to the switch
(2) Screw hole for attaching the bracket to the rack
post
Figure 3 1U four-hole mounting bracket
(1) Screw hole for attaching the bracket to the switch
(2) Screw hole for attaching the bracket to the rack
post
Attaching the mounting brackets to the switch
The switch provides two installation positions for mounting brackets: one front mounting position
(near the network ports) and one rear mounting position (near the power modules).
To attach the mounting brackets to the switch:
1.
Determine the mounting position.
2.
Align one mounting bracket with the screw holes at the mounting position. Use M4 screws
provided with the switch to attach the mounting bracket to the chassis.
{
For two-hole mounting bracket installation, see
.
{
For four-hole mounting bracket installation, see
and
3.
Repeat step
to attach the other mounting bracket to the chassis.
1
2
