59
S5130-54QS-HI
Figure 76 S5130-54QS-HI front panel
(1) 10/100/1000BASE-T autosensing Ethernet port
(2) 10/100/1000BASE-T autosensing Ethernet port
LED
(3) SFP+ port
(4) SFP+ port LED
(5) QSFP+ port
(6) QSFP+ port LED
(7) System status LED (SYS)
Figure 77 S5130-54QS-HI rear panel
(1) Grounding screw
(2) Fan tray slot 1
(3) ACT LED for the management Ethernet port
(4) LINK LED for the management Ethernet port
(5) Management Ethernet port
(6) Console port
(7) Mini USB console port
(8) USB port
(9) Fan tray slot 2
(10) Power module slot 1
(11) Power module slot 2
The S5130-54QS-HI switch comes with power module slot 1 empty and power module slot 2
installed with a filler panel. You can install one or two power modules for the switch as required. In
this figure, two PSR150-A1 AC power modules are installed in the power module slots. For more
information about installing and removing a power module, see "
."
The S5130-54QS-HI switch comes with the two fan tray slots empty. You must install two fan trays of
the same model for the switch. In this figure, two LSPM1FANSA fan trays are installed in the fan tray
slots. For more information about installing and removing a fan tray, see "
