H3C S5120-EI Series, Operation Manual

Page: 979 / 1191

3-5
The startup file used for the next startup must be saved under the root directory of the storage medium.
You can copy or move a file to the root directory of the storage medium. For the details of the
boot-loader
command, refer to
Device Management Commands
in the
System Volume
.
IRF System Upgrade
Network requirements
z
As shown in Figure 3-3 , use a PC as the TFTP server and Device as the TFTP client. Their IP
addresses are 1.2.1.1/16 and 1.1.1.1/16 respectively. An available route exists between Device
and PC.
z
Device downloads a startup file from PC for upgrading and uploads a configuration file named
config.cfg
to PC for backup.
Figure 3-3
Smooth upgrading using the TFTP client function
Configuration procedure
1) Configure PC (TFTP Server), the configuration procedure is omitted.
z
On the PC, enable the TFTP server
z
Configure a TFTP working directory
2) Configure Device (TFTP Client)
If the available memory space of the device is not enough, use the
fixdisk
command to clear the
memory or use the
delete /unreserved file
-
url
command to delete the files not in use and then perform
the following operations.
# Enter system view.
<Sysname> system-view
# Download application file
newest.bin
from PC to Device.