Command Manual – BFD-GR
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 BFD Configuration Commands
1-7
<Sysname> display bfd interface
Total Interface Num: 1
Interface: Vlan-interface1 Session Num: 1
Min Trans Inter: 400ms Min Recv Inter: 400ms
DetectMult: 5 Min Echo Recv Inter: 400ms
Auth mode: Simple
# Display detailed information about BFD-enabled interfaces.
<Sysname> display bfd interface verbose
Total Interface Num: 1
Interface: Vlan-interface1 Session Num: 1
Min Trans Inter: 400ms Min Recv Inter: 400ms
DetectMult: 5 Min Echo Recv Inter: 400ms
Auth mode: Simple
LD/RD SourceAddr DestAddr ConnType State Mode
1 192.168.0.136 192.168.0.138 Direct Up Echo
Table 1-1
Description on the fields of the
display bfd interface
command
Field
Description
Interface Interface
name
Session Num
Number of sessions established on the local interface
Min Trans Inter
Expected minimum transmit interval configured on the interface
Min Recv Inter
Expected minimum receive interval configured on the interface
DetectMult
Session detection multiplier
Min Echo Recv
Inter
Minimum interval for receiving echo packets
Auth mode
Session authentication mode: simple, MD5, or SHA-1
LD
Local ID of the session
RD
Remote ID of the session
SourceAddr
Source IP address of the session
DestAddr Destination
IP address of the session
ConnType
Connection type of the interface
State Session
state
Mode Mode
