H3C S3100V3-EI Series, Installation Manual, Page: 54 / 57

2-17
GE SFP
transceiver
module and
cable
Central
wavelength
(nm)
Connect
or
Cable/Fiber
type and
diameter (µm) Modal
bandwidth
(MHz × km) Max
transmission
distance
RX: 1490
SFP cable
SFP-STACK-Kit N/A 1.5 m (4.92 ft)
IMPORTANT:
The SFP-GE-LX-SM1310-BIDI and SFP-GE-LX-SM1490-BIDI transceiver modules, the
SFP-GE-LH40-SM1310-BIDI and SFP-GE-LH40-SM1550-BIDI transceiver modules, and the
SFP-GE-LH70-SM1490-BIDI and SFP-GE-LH70-SM1550-BIDI transceiver modules must be used
in pairs. For example, if one end uses an SFP-GE-LX-SM1310-BIDI transceiver module, the other
end must use an SFP-GE-LX-SM1490-BIDI transceiver module.
Table3-6 FE SFP transceiver modules
FE SFP transceiver
module Central
wavelength
Connector Fiber
Max
transmission
distance
SFP-FE-SX-MM1310-
A
1310 nm LC
•
50/125 µm,
multimode
•
62.5/125 µm,
multimode
2 km (1.24 miles)
SFP-FE-LX-SM1310-A 1310 nm LC
9/125 µm, single
mode
15 km (9.32 miles)
SFP-FE-LX-SM1310-D 1310 nm LC
9/125 µm, single
mode
15 km (9.32 miles)
SFP-FE-LH40-SM1310 1310 nm LC
9/125 µm, single
mode
40 km (24.86 miles)
SFP-FE-LH80-SM1550 1550 nm LC
9/125 µm, single
mode
80 km (49.71 miles)
SFP-FE-
LX-SM1
310-BIDI
You must
use these
two
transceiver
modules in
pairs.
•
TX: 1310 nm
•
RX: 1550 nm
LC
9/125 µm, single
mode
15 km (9.32 miles)
SFP-FE-
LX-SM1
550-BIDI
•
TX: 1550 nm
•
RX: 1310 nm
LC
NOTE:
•
As a best practice, use H3C SFP transceiver modules and cables for the SFP ports.
•
The H3C SFP transceiver modules and cables available for the SFP ports are subject to change
over time. For the most up-to-date list of H3C SFP transceiver modules and cables available for
the SFP ports, contact your H3C sales representative or technical support engineer.
•
For the specifications for the H3C SFP transceiver modules and cables, see H3C Transceiver
Modules User Guide .