17
Installing a fan tray
The following procedure installs a fan tray in the FAN2 slot.
To install a fan tray:
1.
, pivot up the fan tray handles to make them perpendicular
to the fan tray.
2.
, hold the fan tray handles and slide the fan tray along the
guide rails into the slot.
3.
, fasten the captive screws (to a torque of 5 kgf-cm/0.49
Nm as a best practice) on the fan tray.
4.
Pivot down the fan tray handles to be sure that they hold firmly on the fan tray.
Figure 3-11 Installing a fan tray
Removing the filler panel from a fan tray slot
The device comes with the FAN1 and FAN5 slots installed with filler panels. To install a fan tray in
the FAN1 or FAN5 slot or install a fabric module in slot 12 or 13 under the FAN 1 slot or slot 20
under the FAN 5 slot, first remove the filler panel from the slot.
To remove the filler panel from a fan tray slot:
