3-11
Figure 3-8 Installing a filler panel in a fabric module slot (S12516R)
(1) Push the filler panel slowly into the slot
(2) Simultaneously rotate the ejector levers inward
(3) Fasten the captive screws on the ejector levers
Removing a filler panel from a fabric module slot
1.
As shown by callout 1 in
, loosen the captive screws on the ejector levers.
2.
As shown by callout 2 in
, rotate outward the ejector levers. Then pull the filler panel
part way out of the slot.
3.
As shown by callout 3 in
, hold the filler panel by the top and bottom edges to pull the
filler panel out of the slot.
Keep the removed the filler panel secure for future use.
