3-3
Figure 3-2 Removing an SEU
Installing and removing interface modules
Removing the protective blank panel
WARNING!
The protective blank panel is heavy. To avoid bodily injury, use both hands to remove it.
The device comes with a protective blank panel installed over the interface module slots to protect
the device from damage during shipment.
To remove the protective blank panel:
1.
Remove the screws that secure the protective blank panel to the device. See callout 1 in
2.
As shown by callout 2 in
, remove the protective blank panel with both hands.
Keep the removed protective blank panel and screws secure for future use.
Figure 3-3 Removing the protective blank panel
Installing an interface module
The ejector levers of the interface modules and the ejector lever pillow blocks have purple marks.
To install an interface module:
1.
Orient the interface module with the lettering on it upward.
1
2
1
1
2
