9
Before the installation, prepare an ESD wrist strap and a Phillips
screwdriver yourself.
Installing the power supply
A power supply slot can be vertical or horizontal. The power supply
installation method is similar for vertical and horizontal power supply
slots. This procedure installs the power supply in a vertical slot.
To install the power supply:
1.
Wear an ESD wrist strap, and make sure the wrist strap makes
good skin contact and is reliably grounded.
2.
Use a Phillips screwdriver to loosen the captive screw on the
filler panel in the target slot, and then remove the filler panel.
3.
Unpack the power supply.
4.
Correctly orient the power supply according to the diagram
printed on the filler panel.
5.
Holding the power supply handle with one hand and supporting
the power supply bottom with the other, slide the power supply
along the guide rails into the slot.
