12
4.
As shown in
, press the latch towards the handle, and
pull the power module along the guide rails until it is part-way
out.
5.
Grasp the handle of the power module with one hand, and hold
the bottom of the power module with the other hand to pull the
power module slowly along the guide rails out of the slot.
Figure 9 Removing the power module
6.
Put the removed power module on an antistatic mat or into its
package.
NOTE:
If you do not insert another power module into the slot after
removing the power module, install the filler panel to the power
module slot to prevent dust from entering the chassis.
1
2
