4
•
To avoid power module damage, do not open the power module.
When the internal circuits or components of the power module
fail, contact H3C Support.
Tools
Prepare an ESD wrist strap and a flat-blade screwdriver yourself.
Installing and removing the power module
Make sure the power module model is compatible with the device.
For more information about hardware compatibility, see the
installation guide for the device.
Installing the power module
To avoid bodily injury or device damage, follow the procedure
in
to install the power module.
Figure 2 Installation procedure
To install the power module:
1.
Wear an ESD wrist strap and make sure the strap makes good
skin contact and is reliably grounded.
2.
Unpack the power module and verify that the power module
model is as required.
3.
Remove the filler panel as shown in
, if any, from the
target power module slot.
{
Put your finger into the hole in the filler panel and pull the
filler panel out along the guide rails.
