8
If the LED is steady green or flashing green, the power cord is
connected correctly. If the LED is off or amber, check the
installation and fix the issues.
Removing the power module
To avoid bodily injury or device damage, strictly follow the procedure
in
to remove the power module.
Figure 6 Power module removal procedure
To remove the power module:
1.
Turn off the circuit breaker.
2.
Wear an ESD wrist strap, and make sure the strap makes good
skin contact and is reliably grounded.
3.
Loosen and remove the cable tie, and then remove the power
cord.
4.
As shown in
, use one hand to hold the power module
handle, press the latch towards the handle, and then pull the
power module part way out of the slot. Supporting the power
module with the other hand, pull it completely out of the slot.
Turn off the circuit breaker
Disconnect the power cord
Remove the power module
