H3C NIC-FC730i-Mb-2-32G, Manual

Page: 5 / 37

2-1
2
About the NIC
Note
Figures in this manual are for illustration purposes only. The actual product may vary.
2.1 Overview
NIC-FC730i-Mb-2*32G (hereinafter referred to as FC730i) is an FC NIC with two 32G FC ports. It
provides network interfaces for blade servers to connect to ICM slots, and is applicable to B16000
blade enclosure. FC730i exchanges data with blade servers via x8 bandwidth PCIe lanes and
connects to the ICM through two 32G FC ports via the mid-backplane. It supports applications
such as FC SAN, FC Boot and NPIV.
2.2 Appearance
Figure 2-1 shows the appearance of FC730i. It applies to B16000 blade servers. For the specific
installation position, see 4.2 Blade Servers Supported by the NIC .
Figure 2-1 Appearance of FC730i
2.3 Specifications
This section introduces the product specifications and technical parameters of the NIC.