5-4
(4) After the driver installation is finished, reboot the system to make the new driver take effect.
a. Run the
modinfo lpfc
command again to check the driver version and make sure the new
driver has taken effect.
3. Uninstalling the Driver
To uninstall the driver installed with the source package, go to the
elx-lpfc-dd-rhel7-<ver>
directory of the source package again, and then run the
./extra/build.sh remove
command to
uninstall the driver.
5.3.2 Windows Operating Systems
1. Checking the Current NIC Driver
(1) Click the
Windows
button to enter the
Start
menu.
(2) Click
Control Panel
>
Hardware
>
Device Manager
to access Device Manager, as shown
in
Figure 5-7 Accessing Device Manager
(3) In the page shown below, right-click the Fibre Channel Adapter port corresponding to the
FC730i NIC and select the
Properties/Driver
tab to view the driver information of the NIC.
