5-1
5
Configuring the NIC
Note
The software UI shown in this manual is specific to a certain software version. The software UI may
be updated from time to time. Please refer to the actual product UI.
•
The FC function requires remote network storage devices. The configuration methods of the
network storage devices are different. This manual only introduces the configuration related to
the local server side.
5.1 Port Correspondence between the NIC and ICM
For the port correspondence between the Mezz NIC and ICM, check it at
ICM Management
>
Port
Mapping
in the OM web UI, or query with
5.2 Identifying NIC Ports under OS
This section describes how to confirm the port of FC730i is identified under OS.
CentOS 7.4 and Windows Server 2012 R2 are used as examples.
5.2.1 Linux Operating Systems
(1) Run the
lspci | grep LPe32000
command to check the PCI information of the FC730i NIC.
The two PCI devices correspond to the two ports of the NIC, as shown in
Figure 5-1 Viewing the PCI information
(2) Run the
ls /sys/class/fc_host/
command to check if there are two
host
folders created
under the
fc_host
directory.
Figure 5-2 Checking the
host
folder under the
fc_host
directory
(3) Run the
cat /sys/class/fc_host/host*/symbolic_name
command to check
symbolic_name
of each
host
folder. If there are two
host
folder with
symbolic_name
prefix
